EMPUR > en > Systems > CUT-THERM® milling system

CUT-THERM® milling system

Finally lay your old heating system to rest

CUT-THERM® is the quick modernisation solution system by EMPUR® that cuts a floor heating system into existing floors without causing damage or changing the screed level.
An experienced EMPUR® installation team uses a special floor milling machine to cut grooves for the heating pipes into the existing screed, with virtually no dust (cement or anhydride screed with a minimum thickness of 40 mm). Thus the floor lining can be placed into position immediately after the pipes have been laid into the grooves.
The grooves are cut directly into the existing screed! Thus the construction requirements are reduced to a minimum. No floor core refurbishment is required.
The CUT-THERM® installation teams carry out the following service:
  • Cutting of grooves into the existing screed at a laying distance of 12.5 cm
  • Laying of the floor heating pipes into the grooves
  • Installation of the heating circuit manifold and connecting of the floor heating pipes to the manifold
  • Leakage test
CUT-THERM® milling system

The EMPUR® milling system has many uses:

  • in new and old buildings
  • in residential and commercial buildings
  • in single family houses and buildings for multiple families

EMPUR® CUT-THERM® impresses with

  • Enabling the retrofitting of a floor heating system
  • No additional installation height (zero-installation-height)
  • Professional installation by our own staff
  • Minimal construction requirements - NO floor core refurbishment
  • Virtually dust-free cutting of the grooves
  • Quick laying and construction progress
e.g.: modernisation of a living space up to 120 square

Take two minutes...

...and we will demonstrate the laying of our CUT-THERM system to you!

  • Detailed photos

    Detailed photos

    Our own installation team
    Virtually dust-free cutting of the grooves
    Installation of heating pipes
    Quick construction progress
    No additional installation height
    Easy modernisation

  • Benefits for the processor

    • One system, one manufacturer - from consultation to design and on to delivery and installation of the components, including pressure testing - all under one roof
    • Security thanks to full service Provision - including planning and execution
    • Proven system component quality and professional installation by our own staff
    • No additional installation height (zero-installation-height)
    • Equipment and installation team are organised and coordinated by EMPUR®
    • Thus the construction requirements are reduced to a minimum - no floor core refurbishment
    • Virtually dust-free cutting of grooves into the existing screed at the required laying distance (125 mm)
    • Quick laying and fast construction progress - rooms can be used again quickly, as no drying times are necessary
    • Quick and neat solution for the modernisation/renovation of old buildings
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by laying them into the cut pipe grooves
    • Secure fastening of the heating pipes through the clamping effect of the redirectors
    • Quick and flexible laying of pipe dimensions and qualities of the same system
    • No screed placement necessary, placement of levelling compound or flexible adhesive dependent on the type of floor lining
    • No additional surface weight
    • Can be adjusted quickly thanks to minimal pipe overlap
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as control technology products
    • Easily connected to existing heating systems
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

  • Benefits for the end-consumer

    • One system, one manufacturer - from consultation to design and on to delivery and installation of the components - all under one roof
    • Security thanks to full service provision - including planning and execution
    • Proven system component quality and professional installation by our own staff
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by laying them into the cut pipe grooves
    • Secure fastening of the heating pipes through the clamping effect of the redirectors
    • No screed placement necessary, placement of levelling compound or flexible adhesive dependent on the type of floor lining
    • No additional surface weight
    • Quick reaction time thanks to minimal pipe overlap
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as control technology products
    • Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
    • No swirling up of dust, suitable for people with allergies
    • Highest comfort thanks to heat radiation
    • New design possibilities without heaters
    • Increases building value
    • Energy savings through low flow temperatures
    • Easy modernisation - retrofitting possible
    • Barrier-free modernisation options
    • No additional installation height (zero-installation-height)
    • Virtually dust-free cutting of the pipe grooves
    • Quick laying, rooms can be used again within 3-4 working days
    • Clean + innovative
    • Minimal requirements without floor core refurbishment
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

We are happy to answer any questions you might have regarding our milling system!

The respective departments in our plants are always at your disposal if you require advice.

Or simply use our  contact form!


Print pagePrint page